Onza Orbita Trials Cranksets, with 22T Ring and BashGuard
HALF PRICE
- Brand: Onza
- Model: Orbita 170mm or 175mm Black Street
- A tough street trials crank set.
- 170 mm chunky square taper drive cranks incredibly stiff .
- Screw on bash ring and chainring.
- Bash Ring Patented stainless steel outer ring
- Cranks fitted with 22 Tooth stainless steel 5 bolt Chainring
- Cranks Complete with Screw on Guard and attached Chainring
- total weight 928grms
- Anodised in Black with natural Stainless Ring Outer Bash
- Steel insert for pedals for tough Pedal retention
For a strong Top Quality street trials Crankset there is little to compete with this popular little combination. Suitable for most 26” wheel Stock Trials bikes. It represents great value. Onza's patented stainless steel outer bash vastly increases the strength without a weight penalty. The steel inserts for pedals make thread stripping a thing of the past.
Ensure that your pedals are tightened to at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides. Before fitting, it's also a good idea to make sure your pedal axles are clean (a wire brush works well) then greased before installation.
Similarly, always check crank bolt torque is at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides, then each and every ride after that.
Failure to keep your pedals or crank bolts tight as described above is likely to damage your cranks and this will not be covered under warranty.
Ensure that your pedals are tightened to at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides. Before fitting, it's also a good idea to make sure your pedal axles are clean (a wire brush works well) then greased before installation.
Similarly, always check crank bolt torque is at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides, then each and every ride after that.
Failure to keep your pedals or crank bolts tight as described above is likely to damage your cranks and this will not be covered under warranty.